Faça uma cotação

Driver de LED regulável DALI
With Dip Switch Constant Current
boqi Save Your Time & Cost

What Makes Our DALI Driver Stand Out?

Compatible with DALI Dimmers and Systems – Works seamlessly with mainstream DALI controllers and lighting systems.
Wide Dimming Range (0.1–100%) – Enables ultra-smooth dimming down to 0.1% for premium lighting experiences.
DIP Switch Adjustable Current—Easily select output current levels in fine 50 mA steps via onboard DIP switches for flexible project use.
PF>0.95, Flicker-Free Dimming – Designed for flicker-free performance to ensure visual comfort and meet IEEE 1789 compliance.
Get A Quick Quote

Explore boqi DALI Driver Collection

DALI Dimmable LED Driver Adjustable Current Constant Current

Modelo: BQ-020DNPC-S

Power: 3-16W

Input: 100-265VAC

Output: 9-42V

150mA/200mA/250mA/300mA/

350mA/400mA/450mA/500mA

DALI Dimmable LED Driver Adjustable Current Constant Current

Modelo: BQ-030DNPC-S

Power: 5-30W

Input: 220-240VAC

Output: 9-42V

550mA/600mA/650mA/700mA/

750mA/800mA/850mA/900mA

DALI Dimmable LED Driver Adjustable Current Constant Current

Modelo: BQ-050DNPC-S

Power: 9-48W

Input: 220-240VAC

Output: 9-42V

950mA/1000mA/1050mA/1100mA

/1150mA/1200mA/1250mA/1300mA

Get Product Catalog

Versatile Applications, Illuminate Endless Possibilities

Smart Office Ceiling Lighting
IP20 DALI constant current drivers allow centralized dimming via a building management system (BMS). Enables daylight harvesting, individual fixture control, and energy-efficient scheduling.
Explore More Solutions
1 smart office ceiling lighting scenario a moder
Hotel Guest Room Downlights
Constant current DALI drivers ensure flicker-free, low-level dimming and scene control integration. Supports personalized lighting modes (reading, relaxing, sleeping) with seamless operation.
Explore More Solutions
2 hotel guest room downlights scenario a hotel e
Museum Accent Spotlights
IP20 DALI dimmable drivers deliver smooth dimming from 100% to below 1%, protecting sensitive artwork. Allows curators to fine-tune lighting per exhibit through software without manual adjustments.
Explore More Solutions
Art Gallery Track Lighting Solution
Hospital Examination Room Lighting
IP20 constant current DALI drivers enable flicker-free dimming with programmable presets for different procedures. Meets strict lighting standards for comfort and visibility, with remote status monitoring via DALI.
Explore More Solutions
6 hospital examination room lighting scenario a

Customize for Unique Lighting Solutions

Startup Delay Time / Soft Start
Set custom soft start behavior for smoother power-up, dimming and protection of LEDs.
DALI-2 Protocol Compatible
Fully supports the latest DALI-2 standard for enhanced interoperability and control.
Dimming Curve Type
Select linear or logarithmic dimming profiles for optimal control experience.
Cable & Connector Types
Customize wire lengths, terminal blocks, or quick connectors to speed up installation.
Logo & Label Customization
OEM/ODM branding and private labels options for your brand.
Custom Packaging (OEM/ODM)
Tailor the packaging box, user manual, barcode, and label format for your market.

Explore boqi Factory: The Source of Quality

Inquiry
Whatsapp Weixin Phone-square-alt

At boqi, we believe that trust begins with exceptional quality. From innovative design to precision manufacturing, every detail of our production process reflects our commitment to delivering dependable LED lighting solutions. Step inside our factory and discover how advanced technology, expert craftsmanship, and strict quality standards ensure that every boqi product meets the highest expectations — giving your business the performance and reliability it deserves.

Book Your Visit Now

Differentiated Services: Precisely Meeting Your Business Needs

For Offline Clients

Dimmer Compatibility Test

Free testing to ensure perfect match with your dimmer and lighting brands.

One Stop Services

Offer boqi dimmers perfectly compatible with our dimmable LED drivers.

Stable Supply & Fast Delivery

Efficient logistics to meet your project deadlines consistently.

For Online Clients

No MOQ Ordering

Support flexible orders with mixed product options.

Custom Logo for Small Orders

Low MOQ with branded logo for online sales.

Content Support for Listings

Photos, specs, and descriptions ready for e-commerce platforms.

For Brand Partners

Exclusive Design Protection

Private molds and NDAs to secure your IP.

Joint Engineering Support

Work directly with our R&D team for custom tech.

OEM/ODM Custom Solutions

Tailored designs for dimmers and drivers with your branding.

Explore Partnership Benefits

boqi's One-stop Service,
Save Worry, Save Trouble, Save Cost

Understand your market and deliver what your customers truly need.

Design LED dimmers and drivers that stand out and sell well.

Turn bright ideas into reality with competitive pricing and quality.

Maintain your brand reputation with stable, certified, and tested products.

Accelerate development and delivery to lead your market early.

Support private label and exclusive distribution to protect your territory.

Ensure Every Order is Produced On Time, with Quality Assured

Step 1: Product Specification Confirmation
Confirm dimming type (leading/trailing edge), input/output voltage, current, wattage, housing type, certifications (CE, UL, etc.).
Step 2: PCB Layout DesignPCB
Convert schematic into PCB layout using CAD software; ensure thermal and EMC considerations are met.
Step 3: SMT Process (Surface Mount Technology)
Apply solder paste, place components using pick-and-place machine, and reflow solder the PCB.
Step 4: DIP Process (Through-Hole Insertion)
Insert transformers, coils, connectors, and larger capacitors; solder using wave soldering or manual method.
Step 5: AOI Inspection (Automated Optical Inspection)
Check for missing, misaligned, or poorly soldered components post-SMT/DIP.
Step 6: Electrical Function Test
Full function test for voltage, current, dimming performance, short circuit, and open load protection.
Step 7: Assembly of Housing and Heat Sink
Fix the PCB into the flame-retardant plastic or aluminum casing; apply thermal pads or paste if needed.
Step 8: Burn-In Test
Operate under high temperature and full load (45–55°C) for 2–4 hours to identify early failures.
Step 9: Labeling & Quality Inspection
Apply product labels (specs, logo, certifications); perform visual and dimensional checks.
Step 10: Packaging
Place unit in branded inner box with instruction manual; pack into cartons with appropriate protection and labeling.

boqi Never Leaves Problems for Customers to Solve. It’s a Principle We Stand By!

Start Your Order Today

Every Batch Ready to Meet Your Customers' Expectations

Output Voltage Test

Verify that the driver provides the correct DC output voltage (e.g. 12V, 24V) under no-load and full-load conditions.
Learn more

Output Current Test

Confirm constant current regulation matches the rated specification (e.g. 300mA, 700mA).
Learn more

Power Factor (PF) Test

Ensure PF is ≥0.95 at full load per EU and North American standards.
Learn more

TRIAC Dimmer Compatibility Test

Test with various leading /trailing edge dimmers (e.g., Lutron, Leviton, Clipsal) to ensure smooth dimming and no flicker.
Learn more

Dimming Range Test

Verify dimming curve from 100% to minimum output (often 10% or lower) without dropouts or cutoff.
Learn more

Burn-In Test

Operate driver under full load and elevated temperature (typically 45–55°C) for 2–4 hours to detect early failures.
Learn more

Salt Spray Test

Place driver housing or terminals in 5% NaCl fog chamber for 48–96 hours. Check for corrosion resistance of external metal parts or screws.
Learn more

Drop Test

Drop packaged unit from 1 meter on all sides/corners to confirm mechanical robustness.
Learn more

Transport Vibration Test

Simulate logistic vibration to ensure product survives shipping without internal loosening.
Learn more

Globally Recognized Quality Certifications

Our products undergo multiple technical certifications and testing annually, including CE, SAA, CB, EMC, LVD, RoHS, and TUV, based on customer requirements. This ensures full compliance with international standards for safety, quality, and energy efficiency, providing our global partners with reliable and certified lighting solutions they can trust.

15+

Years of Industry Experience

With over 15 years of expertise in LED lighting manufacturing, boqi brings deep industry knowledge, proven performance, and trusted quality to clients around the world.

100+

Custom Dimming Solutions Delivered

From TRIAC to 0-10V and DALI, we have successfully developed and delivered over 100 tailored dimming solutions to meet unique project requirements in commercial, residential, and industrial applications.

60+

Serving 60+ Countries and Regions

Our products light up spaces in more than 60 countries, trusted by lighting distributors, contractors, and OEM clients for their reliability and global compliance.

0

Zero MOQ Policy for Standard Models

We support growing businesses by offering no minimum order quantity on standard models, making it easier for startups, small wholesalers, and lighting brands to work with us flexibly.

Trusted by Our Valuable Partners

“boqi’s dimmable LED drivers are incredibly reliable and easy to install. We've been sourcing from them for over three years and have never had a return. Their technical support and fast response time make them a trusted partner for all our lighting projects.”
Lu** F**
“As a contractor, I need dependable products that don’t fail on-site. boqi delivers just that. Their TRIAC dimmers and drivers work smoothly with various LED brands. The quality and consistency are top-notch.”
Ja** W**
“boqi’s engineering team helped us solve a dimming compatibility issue quickly. They even provided custom solutions that fit perfectly into our lighting systems. Very professional and responsive.”
He** J**

Our Sustainability Efforts for the Next Generation

Renewable Energy
Sustainable Materials
Eco-Friendly Packaging
Energy-Efficient Products

Explore More Options from boqi

Regulador de intensidade TRIAC

TRIAC Dimmable LED Driver With DIP Switch

Drivers de LED reguláveis Triac de corrente constante 15W 350mA

TRIAC Dimmable LED Driver C.C.

Driver de LED regulável Triac de tensão constante HPFC 24V 30W

TRIAC Dimmable LED Driver C.V. 20-75W

TRIAC Dimmable LED Driver C.V. 75-240W

TRIAC Dimmable LED Driver Supper Slim

Controlador DALI

DALI Dimmable LED Driver With DIP Switch

Drivers de LED de corrente constante DALI reguláveis 24W 600mA

DALI Dimmable LED Driver C.C.

Driver de LED regulável HPFC de tensão constante DALI 24V 60W

DALI Dimmable LED Driver C.V. 20-75W

DALI Dimmable LED Driver C.V. 75-240W

DALI Dimmable LED Driver Supper Slim

Regulador de intensidade 0-10V

TRIAC Dimmable LED Driver With DIP Switch

Drivers de LED de corrente constante reguláveis de 0-10V 15W 350mA

0-10V Dimmable LED Driver C.C.

Driver de LED regulável de tensão constante HPFC 0-10V 12V 60W

0-10V Dimmable LED Driver C.V. 20-75W

0-10V Dimmable LED Driver C.V. 75-240W

0-10V Dimmable LED Driver Supper Slim

FAQs About DALI Dimmable LED Driver Manufacturer


A: Yes, we offer free samples for most of our standard dimmable LED drivers and dimmers. Shipping costs may apply depending on your location. Contact our sales team to request a sample pack.

A: For standard models, lead time is usually 5–10 working days. Custom products may take 10–20 working days depending on the complexity and quantity. We also offer fast prototyping service within 5 days.

A: Yes, we specialize in OEM and ODM projects. From housing design to custom voltage/current settings, we work closely with clients to develop branded or tailor-made dimming solutions.

A: For most of our standard models, there is no MOQ. This allows new businesses and small-volume buyers to start with ease. For custom products, MOQ requirements may vary depending on the specifications.

Lasted Insights From Our Experts

Welcome to Send Us an Inquiry, We Have Prepared a Surprise Gift for You!

Get a Stage Light 2025 Trends Report

Product Category

Inscrição

Why boqi

Contate-nos

  • Block 3, Shangshuijing 6 Industrial Park, Jihua Road, Longgang Dist, Shenzhen, 518112, Guangdong, China
  • 86-13662271822
  • zoe@boqiled.com

© 2025 boqi is a Trademark of Shenzhen Boxinqi Technology Co Ltd

Linkedin Facebook Twitter Youtube Instagram

Peça um orçamento rápido

Entraremos em contato em até 1 dia útil, fique atento ao e-mail com o sufixo “@boqiled.com”.